Shark Rocket Vacuum Wall Mount - No screws needed

Description

NOTE****:  DO NOT BUY this if you intend to hang your vacuum from it, it will not support the weight.. please read entire description as this special design is only meant to cradle the vacuum as the vacuum is top heavy.  sorry for the all caps but people are not understanding our design. If you want the hanging design, we sell that here:
https://www.ebay.com/itm/265462602460
Video on how to properly mount the bracket:
https://youtu.be/bqA7QFQdtvo
This product is for those vacuum which is top heavy and slides down when its leaned against the wall. This product stops it from sliding down. If you didn't have this issue, please do not buy the bracket, but consider only buying the tool rack wall mount to keep your tool brushes organized.
The Shark Rocket vacuum sucks up dirt really well.  We love this vacuum.  You know what else it sucks at?  You guessed it, it sucks because it doesn't come with any wall mount OR brush holder.  The MSRP for this model is about 0 and for that amount they expect you to remove the canister every time you use it and mount the canister on the stick to store it away.  How about the 4 tool head and brushes?  Just leave them all the floor so they can get lost?
As they say, necessity if a mother of all inventions.  We invented this "Wall Mount"  for the vacuum and also invented the Tool Rack for all the brushes.  We say "Wall Mount" because it's the typical verbiage to use for this type of application, but the vacuum does NOT mount on it; but it it's more of a Cradle action.  This is a Wall Cradle so that the Vacuum can lean in it.  This has several benefits:
See the demo:
https://youtu.be/1Tz4GJHhv9U
Pro:
-  No need to find a stud in the wall to drill into.  We will include two Command Strip tape so that you can place on any wall without damaging wall
-   It has holes so that you can nail/screw into wall (if you should need to, but this is unnecessary ..because....)
-   Vacuum does NOT hang onto this bracket, so nails are not necessary because the vacuum is standing on it's own and this bracket is merely just cradling it, so hardly any downward force
is applied, therefore the Command Strip tape is enough.
-  No risk of damage to wall or vacuum, unlike the typical wall hook which constantly puts gravity pressure.
-  Very easy to slide in and out; unlike the typical hook which is so small that you have to try multiple times to locate in order to hang it.
-  No need to take apart the canister to store it, saves time and frustration
-  Choose between Right or Left side Bracket; depending on your wall space and storage orientation
- Compare this design with the typical dinky hanger that others are selling, which you'll need to screw and find a stud.  Believe me, I'm a handy man as well and if you don't find a stud, after some time, your wall will have a hole, even if you use the drywall anchors.  Theirs is for a small plastic.  While this is a bit more, you're getting more plastic and a superior design.  We have those dinky hanger we have printed and can sell those to you if you insist.
Pair our Wall Bracket with our Tool Rack;
available in two different sizes and layout:
* Keep your tool head and brushes organized and never lose them.
* Comes with 3 Command Strips to mount them without nails. It is very light so we found it holds up well.
* Has holes for nails if you prefer to nail them into the wall
* Sits nicely on top of our Bracket without interfering with the sliding in / remove out function
* Each post is spread far enough for any tool to be removed without touching other tools
* Each post is pictured label for the appropriate tool so it's organized.
* Don't lose your tools and your sanity trying to find them.  Get this and save your sanity and money.
Simple to tape onto wall, see how we did it:  https://youtu.be/j1EhAY_CXN4
How to order:
Choose your bracket and side direction in which the vacuum will be sliding into.  It will be:  Slide into Right   or Slide into Left  (see picture)
These are sold individually.  Bracket and Tool Brush holder are sold separately.
Choose any color you prefer.
Colors available:   Red, White, Blue, Black, Maroon, Grass Green, Apple Green, Brown, Yellow, Marble, Orange, Purple, Hot Pink, Silver.  Please specify a color at Checkout if you choose Custom color.  If you don't specify, we'll ship to you either White or Black; depending on what we have in stock.
IMPORTANT:  You are only buying the bracket / tool holder and NOT the vacuum itself.  MAKE SURE this fits your vacuum model.  This design is meant to fit Shark IZ363HT Anti-Allergen Pet Power Cordless Stick Vacuum Self-Cleaning Brushroll, PowerFins, Crevice Tool, Dusting Brush, Pet Multi-Tool & Anti-Allergen Dusting Brush , also known as Shark Rocket.  We purchased this from: https://smile.amazon.com/gp/product/B08FP95RQD
Confirmed to fit the following vacuum wide: (Thanks to those that left a review with pictures for others to see the compatibility)
-  Shark Rocket IZ363HT
-  Shark Cordless Pro
-  Shark Rocket Pet Pro IZ162HC
-  Cordless Shark Vertex
-  Shark IX141
The following looks like it'll fit, but not yet confirmed:
- Shark Rocket IZ361H
- Shark Vertex DuoClean PowerFins Cordless IZ440H
- Shark IX140 series
- Shark IZ140 series
- Shark MultiFlex cordless
Facts:
The bracket takes 7 hours to print
The tool rack takes 11 hours to print.
We also sell an adapter if you need to use tool brush with round ends.  Here:
https://www.ebay.com/itm/265553378243
Some report that the 3M command strips do not hold. The 3M strip is a user variable in which we have no control. It works best on very smooth and solid surface such as a metal file cabinet or mirror, etc. If on a Dry sheet rock wall, the bumps and dust may affect it and the command strip may fall off. Also, minimize the handling of the product as oil from fingers can affect stickiness. In these situations, it's recommended to wipe clean before sticking or at least use a screw for assurance.